Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post - How deep can you drill the head (KADE) broken manifold stud

gunluvS14 · 01-21-2009, 08:34 PM

i measure it up to the thread length of the replacement stud, I can't use up the whole helicoil. Maybe I exaggerated a little, but I didn't use anywhere close to half of the free height helicoil.

I'm not really worry about it, the stud is tight and straight, I should have a good seal.

01-21-2009, 08:34 PM	#8
gunluvS14 Zilvia Member Join Date: May 2006 Location: ga Posts: 206 Trader Rating: (0)	i measure it up to the thread length of the replacement stud, I can't use up the whole helicoil. Maybe I exaggerated a little, but I didn't use anywhere close to half of the free height helicoil. I'm not really worry about it, the stud is tight and straight, I should have a good seal. __________________