Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post

st280 · 02-01-2009, 10:59 PM

Hey, was wondering....... if the clutch fork is bent, do I have to drop the tranny to replace? Or will it come out of the bellhousing without removing the tranny?

Just bought a s13 hatch with redtop sr20det, and the only thing that was wrong with it, was the clutch. So troubleshooting everything, I put a new slave cylinder on, and it looks like the clutch fork is bent, to where pushing down on the clutch makes the cylinder on the slave cylinder come out.

02-01-2009, 10:59 PM	#1
st280 Zilvia Junkie Join Date: Feb 2008 Location: San Diego, CA Posts: 307 Trader Rating: (12)	Bent Clutch Fork? Hey, was wondering....... if the clutch fork is bent, do I have to drop the tranny to replace? Or will it come out of the bellhousing without removing the tranny? Just bought a s13 hatch with redtop sr20det, and the only thing that was wrong with it, was the clutch. So troubleshooting everything, I put a new slave cylinder on, and it looks like the clutch fork is bent, to where pushing down on the clutch makes the cylinder on the slave cylinder come out.