Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post

shifts13 · 02-15-2009, 04:57 PM

Here's my problem, I recently changed my upper oil pan on my SR. Put everything back together, and now I'm only getting ~20-30psi of oil pressure during cold starts. However, my idle is normal at around 12-15psi when warm, and 60-80 when I get on it. Before, my autometer gauge read ~70-80psi during cold starts. There are no leaks at all and im running 10w30 weight.
I've already searched, found a few threads, but none were answered. Anyone have any possible solutions? I'll probably be taking the oil pan off again, make sure I put everything back correctly.

Thanks in advance.

edit: problem solved. oil pick up wasn't torqued all the way.

02-15-2009, 04:57 PM	#1
shifts13 Zilvia Member Join Date: Oct 2005 Location: WA Posts: 178 Trader Rating: (9)	low oil press. on start up Here's my problem, I recently changed my upper oil pan on my SR. Put everything back together, and now I'm only getting ~20-30psi of oil pressure during cold starts. However, my idle is normal at around 12-15psi when warm, and 60-80 when I get on it. Before, my autometer gauge read ~70-80psi during cold starts. There are no leaks at all and im running 10w30 weight. I've already searched, found a few threads, but none were answered. Anyone have any possible solutions? I'll probably be taking the oil pan off again, make sure I put everything back correctly. Thanks in advance. edit: problem solved. oil pick up wasn't torqued all the way. Last edited by shifts13; 03-05-2009 at 11:43 PM..