Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post

undercoverdjay · 03-12-2009, 12:22 PM

So I have a couple of RB25s now, one of which still has a stock turbo charger on it. Its a series II R33 T28. I used the stock SR T25 on a KA-T project I built/sold and now am using the SR in my S13 convertible. I'd rather not bolt a boring old T25 to the car, so I said piss on it and decided to actually use my T3 T28 that's on my RB25. Since I went with a much bigger turbo on my RB25.

Guess my question is, does a bottom mount exist? If not, putting this turbo on there will require a longer DP and such. Also, from my experience most top mount manifolds are plumbed for external wastegates. Any place that has these readily available?

Ideas and feedback are appreciated,

Chris

03-12-2009, 12:22 PM	#1
undercoverdjay Zilvia Junkie Join Date: Apr 2004 Location: Potsdam New York Age: 41 Posts: 594 Trader Rating: (2)	SR T3 bottom mount mani So I have a couple of RB25s now, one of which still has a stock turbo charger on it. Its a series II R33 T28. I used the stock SR T25 on a KA-T project I built/sold and now am using the SR in my S13 convertible. I'd rather not bolt a boring old T25 to the car, so I said piss on it and decided to actually use my T3 T28 that's on my RB25. Since I went with a much bigger turbo on my RB25. Guess my question is, does a bottom mount exist? If not, putting this turbo on there will require a longer DP and such. Also, from my experience most top mount manifolds are plumbed for external wastegates. Any place that has these readily available? Ideas and feedback are appreciated, Chris