Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post

240Degrees · 06-22-2003, 02:02 AM

I did the ghetto sleepy eye modification to my car. I spliced into the green wire connected to the button that flips the headlights open, connected it to a rocker switch, and everything. I turn on my lights and only the passenger side headlight is working. Both high beams work, but when I'm driving around, only the passenger low beam is working. I didn't drive my car for 3 days before i modified it, so it might have gone out before.

I think I might have blown a fuse because I didn't disconnect the battery when I did this. The headlight bulb might be out, so it might need replacing.

The 2nd, not so important, problem is my headlights wont stop evenly when i hit the switch while it's closing. The driver's side headlight is higher than the other. Am I just stuck with this?

06-22-2003, 02:02 AM	#1
240Degrees Zilvia Junkie Join Date: Aug 2002 Location: san diego Age: 40 Posts: 508 Trader Rating: (0)	s13 flip up light not working I did the ghetto sleepy eye modification to my car. I spliced into the green wire connected to the button that flips the headlights open, connected it to a rocker switch, and everything. I turn on my lights and only the passenger side headlight is working. Both high beams work, but when I'm driving around, only the passenger low beam is working. I didn't drive my car for 3 days before i modified it, so it might have gone out before. I think I might have blown a fuse because I didn't disconnect the battery when I did this. The headlight bulb might be out, so it might need replacing. The 2nd, not so important, problem is my headlights wont stop evenly when i hit the switch while it's closing. The driver's side headlight is higher than the other. Am I just stuck with this? __________________ tentacles??? wtf!?