Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post - LCA's fall victim to energy suspension (2004 thread updated with 2009 information!)

Bigsyke · 03-25-2009, 05:53 PM

If usually the ES only allows rotation on 1 axis, shouldnt the metal casing be rotating around the actual bolt? I would think as long as you use antiseize you shouldnt have too much of a binding issue.

I see rubber as more of an issue when the bolt seizes, such as the LCA. Those were torn because the bolt was seized to the casing, and the up/down movement was binding in the rubber.

I do reccommend ES LCA bushings, they work great.

03-25-2009, 05:53 PM	#67
Bigsyke Zilvia FREAK! Join Date: Jun 2008 Location: NA Age: 40 Posts: 1,342 Trader Rating: (0)	If usually the ES only allows rotation on 1 axis, shouldnt the metal casing be rotating around the actual bolt? I would think as long as you use antiseize you shouldnt have too much of a binding issue. I see rubber as more of an issue when the bolt seizes, such as the LCA. Those were torn because the bolt was seized to the casing, and the up/down movement was binding in the rubber. I do reccommend ES LCA bushings, they work great.