Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post

JT_Production · 03-27-2009, 12:27 AM

Well this is what I been working on for the last week;

I know I didn't peel the black plastic off the dash but I took bondo and filled all the cracks then took a roller and done 4 thin coats of fiberglass over the dash, its by no means fit to hold the cracks from happening again. I then decided today I would go to Walmart & pick up some felt. I picked up two yards of felt.

I've put far to much effort into the dash but I guess in the end it'll be worth it all.

I'm going to lay thin coats of Fiberglass tmrw, their are some areas I'm not sure if I should put the felt I'm not sure if I'll get the dash to fit if I do laywer up the fiberglass.

If anyone can give me some tips when fiberglassing that'll help me out rather then finding out in the end.

I'm also thinking of getting the dash done BMW jetblack with a clear coat, I also was thinking of going with a satin black.

I wanted to lay Black Gator skin over the dash but I couldn't find any plastic that was big enough to be able to do it.

03-27-2009, 12:27 AM	#1
JT_Production Join Date: Mar 2009 Location: Florida Age: 37 Posts: 16 Trader Rating: (0)	Glalssing my dash Well this is what I been working on for the last week; I know I didn't peel the black plastic off the dash but I took bondo and filled all the cracks then took a roller and done 4 thin coats of fiberglass over the dash, its by no means fit to hold the cracks from happening again. I then decided today I would go to Walmart & pick up some felt. I picked up two yards of felt. I've put far to much effort into the dash but I guess in the end it'll be worth it all. I'm going to lay thin coats of Fiberglass tmrw, their are some areas I'm not sure if I should put the felt I'm not sure if I'll get the dash to fit if I do laywer up the fiberglass. If anyone can give me some tips when fiberglassing that'll help me out rather then finding out in the end. I'm also thinking of getting the dash done BMW jetblack with a clear coat, I also was thinking of going with a satin black. I wanted to lay Black Gator skin over the dash but I couldn't find any plastic that was big enough to be able to do it. Last edited by JT_Production; 03-27-2009 at 01:04 AM..