[N1ceDrgn]

Not to flame you or anything but your list of parts sounds more like a wish list rather than an actual parts list. Like what has been mentioned, some of the parts you've mentioned aren't necessary. The Tomei fuel pump isn't, if you get the Walbro from Summit, that will be the best bot for your money. The flex-a-lites you mention, are they more than 2400rpm? If not, they won't run or cool things as good as what you could have. Check for their fans that run at 5200rpm. You also mention Nismo slave cylinder and steel-braid clutch line? The stock slave is adequate. As far as the braided line, an Earl's line will work just as good and won't cost you as much. Getting back to your hp range, you won't hit that high, 375 - 400, with the stock SR turbine. You'll need something a lot more beefy, something along the lines of a T04S/ R with a waste-gate. The Power FC will help get you around the rom tunes and help you tweak things a little but you won't see the power you want. You'll need the larger turbine setup. Once you do have that much power, you should also be a lot quicker on the track than 12's. You should be in the neighborhood of 9's or so. This is all from what I've helped make, seen done and have done myself.