Quote:
Originally Posted by teamsprock
But does the fork move back even farther than it will when the slave retracts? You need to make sure you can push the fork back even further, to the point where you are pushing the slave cylinder back in. If its stuck it will still move back to the point that the slave retracts but it still continues to have pressure on the pressure plate. I've seen this a lot lately on SR's. Its happened to me before and I would say almost 95% of the time an issue like this happens on an SR it turns out to be this problem.
If its not that then I would say the pressure plate is probably worn out.
|
1 its not a SR and 2 its a brand new slave cylinder, its not getting stuck.