Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post

Jbma327 · 04-18-2009, 03:47 PM

I have SARD 555cc injectors on my red top. They are great and I haven't heard anybody that had problems with them so far. The only thing about use the Sard is that you will need to cut off the stock injector plugs and use the SARD plugs. (MAKE SURE YOU WIRE THEM CORRECTLY!!!)

If you want injectors that are plug and play then go with NISMO/TOMIE/APEXi. They have the same plugs as your stock harness.

prior to installin the new injectors replace and use o-rings and I usually apply a small thin coat of white grease on the o-rings so that they will fall into place smoothly and to avoid tearing the seals. white grease will also make it easier to remove the injectors later on as well.

04-18-2009, 03:47 PM	#6
Jbma327 Zilvia FREAK! Join Date: Sep 2006 Location: SIX-2-SIX Posts: 1,153 Trader Rating: (51)	I have SARD 555cc injectors on my red top. They are great and I haven't heard anybody that had problems with them so far. The only thing about use the Sard is that you will need to cut off the stock injector plugs and use the SARD plugs. (MAKE SURE YOU WIRE THEM CORRECTLY!!!) If you want injectors that are plug and play then go with NISMO/TOMIE/APEXi. They have the same plugs as your stock harness. prior to installin the new injectors replace and use o-rings and I usually apply a small thin coat of white grease on the o-rings so that they will fall into place smoothly and to avoid tearing the seals. white grease will also make it easier to remove the injectors later on as well. __________________ KEEPIN IT REAL!