Quote:
Originally Posted by whyrun?
if you dont need the axles, just ut the nut back on the spline and whale on that fucker.
the hub was stuck in the upright when i did mine so i just took the 36mm socket, placed it on the back on the hub and hit it a few good times with a BFH. came undone in minutes
|
Not a good suggestion. If you don't need the axle, why put the nut back on? If you hit it hard enough the nut will crown the axle's threads, making the nut impossible to get off.
I've only had one really stuck axle before, it was a set of R32 rear uprights, I put the uprights on top of a vice and used a sledgehammer. It still took maybe a dozen good hits. Using a hub puller isn't always optimal because you can pull the hub out of the bearing.