Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post - S14 Zenki SR

aeontony · 07-16-2003, 11:06 AM

Hi Fibercus,

The car should start without those two I believe..but I went through the idle valves with a voltimeter too, and tested them according to the FSM. I hooked them up according to how I thought they should be hooked up, but they weren't getting power. I then just hooked it up to a 12V source in one of the remaining ununsed wires. The car did start but because the timing was off we destroyed the pistons/got no compression. Pretty scary..

07-16-2003, 11:06 AM	#2
aeontony Zilvia Junkie Join Date: Jan 2003 Location: Norcal Posts: 303 Trader Rating: (0)	Hi Fibercus, The car should start without those two I believe..but I went through the idle valves with a voltimeter too, and tested them according to the FSM. I hooked them up according to how I thought they should be hooked up, but they weren't getting power. I then just hooked it up to a 12V source in one of the remaining ununsed wires. The car did start but because the timing was off we destroyed the pistons/got no compression. Pretty scary.. __________________ S14.5 for sale. Must move on with life...=( http://www.zilvia.net/f/showthread.php?t=56822 Au no wa wakare no hajime...