Quote:
Originally Posted by MannylovesLian
the noise is a bad intake cam gear!
You need to buy a new one.
I had the same problem.
|
you couldn't possibly state that as a fact. It's only a possibility. My guess is that is that it's a spun bearing or a bearing that's about to spin. If i were you I would check your oil pan for dents. if dents are found then replace. if rattling still occurs then check your rod bearings. As rod bearing wear you will see a decrease in oil pressure as more oil is slipping by the bearing. More than likely I would suspect rod bearings. It can also be piston slap....due to tapering of the cylinder walls. get it checked out. pull the valve cover off first and see if everything looks ok up top first.
__________________
Pre Tune Checkup! Compression,LeakDown,Vacuum Test $80. Cams Install: $180
|