Quote:
Originally Posted by MannylovesLian
the noise is a bad intake cam gear!
You need to buy a new one.
I had the same problem.
|
How can I test or inspect this? Is this a common/known problem with S15's
Quote:
Originally Posted by SoguRacing
you couldn't possibly state that as a fact. It's only a possibility. My guess is that is that it's a spun bearing or a bearing that's about to spin. If i were you I would check your oil pan for dents. if dents are found then replace. if rattling still occurs then check your rod bearings. As rod bearing wear you will see a decrease in oil pressure as more oil is slipping by the bearing. More than likely I would suspect rod bearings. It can also be piston slap....due to tapering of the cylinder walls. get it checked out. pull the valve cover off first and see if everything looks ok up top first.
|
No dents on the oil pan it's in great shape. I will pull the VC over the wekend. The car only has 45k miles and otherwise mint. Seems like the previous owner took good car of the car, so i'm hoping it's not the rods.
Quote:
Originally Posted by WoolyS14DET
Take a vid and post on youtube and insert the link and let us listen
|
Will do that tomorrow