Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post - SR20 alternator belt install problem/question

iwishiwas-all* · 06-21-2009, 07:19 PM

Oooook.

So,here is the problem: Alternator belt sheared off, went to buy a new belt.

I looked up on zilvia for a gates # got it went to autozone. As an exact replacement, i was sold a DAYCO 5050370 belt.

I go to install, Loosen the 12mm on the black bracket on the front of the alternator, then on the side of the alternator i loosen the long 12 mm bolt in the tensioner galley to the point where it is almost out of the block at the end of it, and the alternator isnt moving much

I need like about an inch of movement to getit on. fuck.

any other bolt on the front of the alternator i need to loosen?????

s13 sr redtop btw. thanks

06-21-2009, 07:19 PM	#1
iwishiwas-all* Nissanaholic! Join Date: Mar 2004 Location: Oxford, UK/Miami Age: 37 Posts: 1,710 Trader Rating: (2)	SR20 alternator belt install problem/question Oooook. So,here is the problem: Alternator belt sheared off, went to buy a new belt. I looked up on zilvia for a gates # got it went to autozone. As an exact replacement, i was sold a DAYCO 5050370 belt. I go to install, Loosen the 12mm on the black bracket on the front of the alternator, then on the side of the alternator i loosen the long 12 mm bolt in the tensioner galley to the point where it is almost out of the block at the end of it, and the alternator isnt moving much I need like about an inch of movement to getit on. fuck. any other bolt on the front of the alternator i need to loosen????? s13 sr redtop btw. thanks __________________ IG @gabednconfused https://www.youtube.com/user/gabedm