Quote:
Originally Posted by Razi
I don't know where you read about hooking one end to a pressure valve, but the 'other end' I think you're talking about, is a boost source.
Somewhere between your turbo and throttle body, you have a source for boost (in the picture posted, it's the outlet of the turbo), which your wastegate is hooked up to, which is the boost source.
|
well see here is the kit i have
and as u can see like the diagram above... the little t type thingy says one end is supposed to go from the wastegate, the other to the controller and the 3rd end to the pressure source whatever the hell that is...
currently i have a line from the wastegate coming across the front of the motor hooked into the bov... so i plug the t into the wastegate, but then the other side has nothing to plug into except the hose coming off the BOV... that is why im confused lol
