[japslapsilvia]

so im supper inspired about some of the wiring job that are here on Zilvia,

so i cleaned up my engine harness


added that braided sleeving...looks all purdy lol

for the oiling system i used the Tomei block adapter

now it mates up nicely with the greddy filter adapter.
i also didnt like the banjo bolt for the turbo oil feed line so i got this from Pegasus

now that every thing was apart i wanted to check the tranny to make sure it was in good condition, it was dirty as shit


took the casing apart to inspect all the gears n synchros




everything lookd pretty good and i never had a problem with it. since it was all apart i decided to paint the housing, but i had to clean it up

dont ask y b/c i dont know but i went with john deere green


now it was time to start cleaning up and get my motor back togather

got an Apexi 1.1 HG

and ARP studs

figured i would color coordinate some shit


then for whatever reason again, i got a differnt turbo, Gt2871 with .82 AR T3 flange and a top mount manifold from JGS tools