[Gjohnson7]

Ok, need a little help. I wanted to see if I had my wiring done correctly before I pulled the engine again to check for a slave cylinder leak, so I slapped on the starter and plugged in all the wires. I turn the key and the engine cranks, but I've got no fuel. The fuel pump doesn't turn on or even start priming. Am I missing something. I am doing a auto to 6 speed swap with this conversion, so I did jump the top connector next to the fuse box that was for the Auto Tranny (Neutral position I think) But am I missing something else. I swapped in a Walbro fuel pump a month or so ago, but it's never been tested or anything.

When I jump the fuel pump wire directly to the battey and hear a relay clicking in the driverside foot well. Next to the fuse box. What am I missing, sorry this is my first Auto to 5/6 speed swap as well.