Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post

singlecamslam · 07-28-2009, 04:59 PM

SCROLL DOWN FOR UPDATE!!.So you would thing installing some tie rods is pretty simple right? well it is, everything went smoothly except the end result. For some reason after i centered the rack out the passenger side tie rod is adjusted almost all the way out, i'm afraid to adjust it any longer, while the driver side is fine. Both wheels get the same amount of angle too. This is on a s13 with s14 knuckles and control arms. Heres some pictures.

07-28-2009, 04:59 PM	#1
singlecamslam Post Whore! Join Date: Apr 2008 Location: Norcal Posts: 2,534 Trader Rating: (10)	spl tie rod install gone wrong SCROLL DOWN FOR UPDATE!!.So you would thing installing some tie rods is pretty simple right? well it is, everything went smoothly except the end result. For some reason after i centered the rack out the passenger side tie rod is adjusted almost all the way out, i'm afraid to adjust it any longer, while the driver side is fine. Both wheels get the same amount of angle too. This is on a s13 with s14 knuckles and control arms. Heres some pictures. __________________ Nothing says racecar like a stock car with no interior. Last edited by singlecamslam; 08-20-2009 at 10:41 PM..