Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post - 89 240 w/dual cam swap cel on and wont throw code

Monooxide · 07-29-2009, 02:26 PM

I don't know from experience, but my first guess or stab at it would be to make sure that the wiring at the plug that goes to the Cluster from the ECU is wired correctly. Make sure a +12 or +5V isnt going to the CEL all the time. I don't think that would cause the ECU to not flash the "All Clear" code though...

Good luck.

07-29-2009, 02:26 PM	#2
Monooxide Zilvia Addict Join Date: Mar 2005 Location: Farmington/Flint, MI Age: 37 Posts: 675 Trader Rating: (8)	I don't know from experience, but my first guess or stab at it would be to make sure that the wiring at the plug that goes to the Cluster from the ECU is wired correctly. Make sure a +12 or +5V isnt going to the CEL all the time. I don't think that would cause the ECU to not flash the "All Clear" code though... Good luck.