Quote:
Originally Posted by kazuma
well this setup is like the white bunny setup. it uses a flywheel almost identical to our ka flywheel but the clutch contact surface is 240mm instead of 220-225mm.
I used a 350z TOB and now I am having slipping issues on my brand new clutch. Guess I gotta take out the transmission again and stick a 240sx throw out bearing in there.
|
Actually, the 350Z clutch is closer to 250mm, at 9 7/8" compared to the 9 1/2" for the White Bunny.
I'd also understood that the TOB was to be used based upon the transmission, and it so happened that the one from the clutch kit I used (mid-grade NAPA one) was identical to the KA one from my 1995 transmission anyway.
I had not cared to look into THIS setup until this morning, and even then only did so to make sure the 24-splines was similar. I know nothing about the RB flywheel though, as this is the first time I had heard of it mentioned for this setup.