Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post - Crankshaft position sensor issues!!!!!!!!!

redsand100 · 09-12-2009, 04:25 PM

I have a 5 speed 94.5 240sx (this is a S14) and, the wire harness for the CKP sensor is missing. I need to know exactly where the two wires for the CKP sensor connect to. I was informed that they connect directly to the PCM in pin 53 for power and pin 50 for ground but, i don't know for sure. The pin 53 in the wiring harness for the the ECM is non-exsisting. I am also unsure if I have obd1 or obd2 because, I have both connectors. Can anyone help? [email protected]

09-12-2009, 04:25 PM	#1
redsand100 Join Date: Jul 2008 Location: San Diego Age: 40 Posts: 1 Trader Rating: (0)	Crankshaft position sensor issues!!!!!!!!! I have a 5 speed 94.5 240sx (this is a S14) and, the wire harness for the CKP sensor is missing. I need to know exactly where the two wires for the CKP sensor connect to. I was informed that they connect directly to the PCM in pin 53 for power and pin 50 for ground but, i don't know for sure. The pin 53 in the wiring harness for the the ECM is non-exsisting. I am also unsure if I have obd1 or obd2 because, I have both connectors. Can anyone help? [email protected] Last edited by redsand100; 09-15-2009 at 01:36 AM..