[jspaeth]

I paid Steve a few bucks in exchange for some consultation time. He gave me valuable advice regarding:

Cam selection
Flywheel selection
Clutch disk selection
Spring/retainer selection
Head disassembly/assembly tips/techniques

And in general, we just discussed some things related to 240s.


I knew a good amount about what I was doing before talking to Steve, but he confirmed many things I was not 100% on and gave me advice on things i knew nothing about.

Reading posts on a forum is fine and dandy, but what you are getting are a lot of bits and pieces of advice from people who have (mostly) either done something ONCE or HEARD from someone that blah blah blah blah blah.

I consulted with Steve, because I knew I would be getting advice from someone who has done the job many dozens of times and tried most of the different parts that are out there.

I highly recommend talking to him if you are undecided between options for your motor (choosing from different cams/turbos/etc) or are just looking for some help/advice.