Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post - Clutch Not Disengaging! Bad bleeding or bad pressure plate?

g6civcx · 09-25-2009, 07:36 AM

Take out the clutch stopper bolt and adjust the master cylinder bolt so that the pedal stroke is as long as possible. Then bleed again.

Then if it works, you can adjust the pedal travel.

This is easier than opening the transmission again.

09-25-2009, 07:36 AM	#3
g6civcx Post Whore! Join Date: Apr 2004 Location: Virginia, USA Posts: 5,764 Trader Rating: (5)	Take out the clutch stopper bolt and adjust the master cylinder bolt so that the pedal stroke is as long as possible. Then bleed again. Then if it works, you can adjust the pedal travel. This is easier than opening the transmission again.