A couple of weeks back I bought some J30 rear spindles. These will bolt up to an S13 rear subframe. They might work on an S14, I don't really know. The only modification needed would be to the where the bottom of the shock/coilover mounts. S13s use a nut, J30s use a bolt. This is similar to the Z32 rear brakes, without the fixed caliper. Drum ebrake setup with 12.5" rear rotor (the same size as Z32!!!)
This sale will come with:
2x J30 RLCA
2x J30 Rear spindles
2x J30 rear five lug hubs
2x J30 rear ebrake cables
2x J30 rear calipers and rotors WITH PADs. (I would recommend rebuilding the calipers, and getting new pads, rotors and ebrake shoes.)
All of the mounting hardware needed. (S13 will work as well.)
Here an entire write up on how to make this setup work in your S13.
J30 rear knuckle on 240sx install: 240SX Forum / 180SX Forum / Silvia Forum: Nissan Forums / Infiniti Forums - NICOclub
Pictures:
Rear shock mount:
I'm asking
$125 OBO PICK UP ONLY. Located in Lancaster, PA area.
Email me at:
[email protected]
IM Me at: Cause Im too JDM
or just PM me!