Quote:
Originally Posted by z2roll4life7
Stock Sr's Run 11 Psi from the Factory.....
Also i Though U place the EGT sensor on to the Manifold before the Turbo?
like about 2 to 3 inches from the head on the 3rd or 4th runner You have a tomei Manifold put a Bung on that u should get a better reading
|
i placed the egt sensor after turbo actually. I tapped a hole on the dp where it was like right next to turbo (less than 1 inch away).
i know on the manifold would give more accurate reading, but really don't want to make a bung on the tomei...
any thoughts on the gauge readings?