Quote:
Originally Posted by !Zar!
Noise during turning would most likely come from:
Loose nut on the top of the coilover.
Loose camber bolts on the top of the coilover.
Loose tension rod bracket.
Bad lower control arm bushing.
If it's under braking then it's most likely a loose brake caliper.
|
also the tie rods
or mounting bolts from the strut to the spindle
make sure all the shyte is tight that you installed, friend of mine had the same problem you're havin, the top bolt to the spindle was loose and the pop was the wheel camber-ing.