Quote:
Originally Posted by negrosx13
Check if your getting fuel before the injectors.meaning pull off the fuel line feed and turn on the pump for a. 1sec.
Make sure your harness is plugged in tight into the ecu(happen to me once)..
|
i felt the line pressure on the feed compared to the return and it felt like it was getting pressure. but its still not getting signal signal to the injectors.
Quote:
Originally Posted by Walperstyle
what ECU do you have? how bad is the fuel?
|
i dont know about the ecu ill find out. and the fuel is old but there wasnt much in there and he put in a gallon of fresh stuff. ill have him do some work on it and also tell me the ecu.
from what i remember he has an ecu for the sohc and for the dohc. will the both work?