|
very big pain in the ass.. in a time consuming way..
your gonna need some very strong body panel adhesive, fiberglass resin and mat(not necc), body filler/bondo, tons of sand paper, and patience lol
after cutting out the old fender, and test fitting and getting the correct position ready
mount the panel on with the adhesive
now comes the time to make the choice if you want you can use fiberglass mat and lay that across the new fender to the body and sand that smooth..
or you can just sand down the edge of the new fender till its close to smooth
either way you go you will be finishing up with some body filler/bondo and lots of sanding
|