Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post

Rownan · 10-10-2003, 07:26 AM

I just dremeled out the hub on a different set of wheels to fit on my 240.. Works fine, no balancing issues. Took a little bit since the material is so strong but I found that if you work around the edge with a cutting wheel it goes MUCH faster.

I cannot tell from the pics how much material you have to work with but I can tell you that on a normal wheel it will not jeprodize the integrity of the wheel if you're only taking out a millimeter or so..

10-10-2003, 07:26 AM	#9
Rownan Leaky Injector Join Date: Apr 2002 Location: Waterford, MI Age: 43 Posts: 133 Trader Rating: (0)	I just dremeled out the hub on a different set of wheels to fit on my 240.. Works fine, no balancing issues. Took a little bit since the material is so strong but I found that if you work around the edge with a cutting wheel it goes MUCH faster. I cannot tell from the pics how much material you have to work with but I can tell you that on a normal wheel it will not jeprodize the integrity of the wheel if you're only taking out a millimeter or so..