Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post

Spring Break '92 · 02-11-2010, 11:35 AM

Sorry to bump an old thread. On my S13 I am having the same issue, but my HKB hub is down as far as any adapter can go and I haven't looked yet, but the brass pin for the horn on the car side might not be contacting the metallic ring on the bottom of the hub. From what I have read, the lower left most pin is the horn. I know that the lower right one is not contacting the hub. I have read that that is a problem with the HKB's. I have a one wire horn Nardi wheel. The wheel that came out was a grant and used two wires to activate the horn. Can a one wire horn setup be made to work on an S13?

02-11-2010, 11:35 AM	#5
Spring Break '92 Zilvia Member Join Date: Dec 2007 Location: unconcious on Daytona Beach Posts: 180 Trader Rating: (1)	Sorry to bump an old thread. On my S13 I am having the same issue, but my HKB hub is down as far as any adapter can go and I haven't looked yet, but the brass pin for the horn on the car side might not be contacting the metallic ring on the bottom of the hub. From what I have read, the lower left most pin is the horn. I know that the lower right one is not contacting the hub. I have read that that is a problem with the HKB's. I have a one wire horn Nardi wheel. The wheel that came out was a grant and used two wires to activate the horn. Can a one wire horn setup be made to work on an S13? __________________ BOOYAH! Last edited by Spring Break '92; 02-12-2010 at 03:53 AM..