Basically lol... i thought this fender was 40mm but now i test fitted it, it seems to fit ok anyhow on 18x12.5j et0 275/35/18
Bearing in mind on the pic the standard arch is sat on the tyre so when its cut obviasly it'll be flush
Anyway now the back is pretty much sorted that just leaves the front... now i have 20mm front fenders... and im running a 18x9.5 et0 (but need a 10mm spacer to clear the caliper) so 18x9.5 et - 10 tyre size is 225/35/18 but heard a 40 would be better for front (i gather this is for the extra weight)
Anyway this is where im at, at the minute the front tyre is sticking out by 20mm from the arch!!
in these pics i had around a 8mm spacer on but it does clip the caliper so needs to be around 10mm also the tyre size is a 245 in the pics 225 now... but still it sticks out 15/20mm
Right now i think i have like 1 degree of camber or something on the front wheels im unsure but you can see it very slight sometimes.. probs not even that... anyway my question is how much camber will i need?
I don't want to run stupid camber as i don't have uprated knuckles yet and want the grip for drifting so would it be a better option for me to just buy 30mm front fenders??