Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post

stussy240 · 02-18-2010, 04:19 PM

just rebuilt my KA to all stock. The motor runs and starts great but it automatically idles at 2k rpm and climbs to 2500 and stays there after awhile of running. the idle is smooth the whole time also. the check engine light comes on when going up to 2500 and stays on. I believe i have the timing set correctly at 20 when i set it i wasnt sure if the TPS needed to be connected or disconnected. i want to check the engine codes but forgot how to put the ecu into mode 3 so i can read the codes. any help is appreciated. thanks.

02-18-2010, 04:19 PM	#1
stussy240 Join Date: May 2009 Location: Canyon Country, Ca Age: 36 Posts: 7 Trader Rating: (0)	high idle and check engine light issue just rebuilt my KA to all stock. The motor runs and starts great but it automatically idles at 2k rpm and climbs to 2500 and stays there after awhile of running. the idle is smooth the whole time also. the check engine light comes on when going up to 2500 and stays on. I believe i have the timing set correctly at 20 when i set it i wasnt sure if the TPS needed to be connected or disconnected. i want to check the engine codes but forgot how to put the ecu into mode 3 so i can read the codes. any help is appreciated. thanks.