|
ok. so i replaced my slave. and the car when turned on WILL not go into gear.
so i turned the car off jammed it in 2nd gear..
turned car on and it still moved even though clutch was to the floor. it moves as if it's an automatic. not fast but a good 3mph idle.
i looked at the master and all seems fine i look under the car and the slave is pushing the fork. i can not see what could be causing this to happen. could my master be blown out??? i don't see and leaks and the pedal feels good.
i used an entire bottle to flush out the old liquid and i know there is no air in the lines.
what else could it possibly be.
one thing to note, i know the car moves on it's own in either 2nd or 3rd gear even though i press the clutch all the way in, but when i get driving i notice it's pretty hard to pull it out of gear like really hard.. is that because it's like half engaged or something?? when i drive the car (stuck in 2nd basically) it drives as if nothing is wrong just can't shift. could something be wrong in my tranny or the clutch??
i'm sure this has happened to some one.. it's just hard for me to get the tranny out as my car is really low and i'm tight on cash.
|