This is the VLSD out of my 1996 240sx. The differential was actually from an ABS model S14, so you will need the rear section from an ABS car if you don't already have ABS. If you have a one piece driveline, and don't have ABS, check to see if you have at least a 1/2" of play in the slip yoke. the differences between an ABS and none ABS housing is only 1/2" in length. I know this b/c I just fitted my Kaaz to a none ABS housing and measured the difference. Its in excellent condition and locks up very well. The output shafts are 6 bolt. Will include OEM forward bushings.
SOLD $200
