[Archangel]

No, the emergency brake is off.

I've done front brakes plenty of times, and I know how to do those, but this is my first time doing rear brakes.

In order to get to the brake pads, you typically remove one of the bolts on the caliper, and lossen the other, then you would rotate the top part up and out of the way to access the brake pads, correct?

However, on the G20 at least, you cannot rotate the top part up, because the emergency brake cable is attatched to it, and there is not enough slack to move the top part of the caliper.

The only other way to do it would be to remove the caliper completely, which is possible, but then you have to try to reseat the piston while the caliper is not bolted to anything, which is extremely difficult.

Any suggestions?