Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post

HiPSI · 11-07-2003, 01:25 PM

either the raising mechanism broke (common on nissans) or the window popped out of place (hope it didn't break). i'm not 100% sure of which setup the 240's have, but if they're like the other 5 nissan windows i've fixed, there's a small plastic tab on a cable that probably broke. it's an easy fix with a little MacGuyver ingenuity though

(i drilled a very small hole and pushed a cotter pin through and bent it around, works like a champ).

11-07-2003, 01:25 PM	#2
HiPSI Zilvia Junkie Join Date: Oct 2003 Location: Buford, GA Posts: 522 Trader Rating: (0)	either the raising mechanism broke (common on nissans) or the window popped out of place (hope it didn't break). i'm not 100% sure of which setup the 240's have, but if they're like the other 5 nissan windows i've fixed, there's a small plastic tab on a cable that probably broke. it's an easy fix with a little MacGuyver ingenuity though (i drilled a very small hole and pushed a cotter pin through and bent it around, works like a champ). __________________ SR motor set/clip $2500+, FMIC kit $700+, Downpipe $100+, 3" exhaust $500+, Misc install parts $100+, Shop labor for install $1000+ and you still only make 220rwhp for $5000 so what's so CHEAP about the SR swap again?