View Single Post
Old 05-08-2010, 10:37 PM   #9
pat1
Leaky Injector
 
Join Date: Oct 2009
Location: georgia
Age: 49
Posts: 109
Trader Rating: (5)
pat1 is an unknown quantity at this point
Quote:
Originally Posted by 2F0-T View Post
And I looked on hybridz and found mainly rb25 swaps..

because everybody thinks the rb20's are crap and can't make any power out of them. Which is wrong. the rb20 is a very easy swap and anyone can do it. I used the stock rb motor mounts and modified the stock z trans crossmember a little (took about ten minutes). The wiring was cake and I thaught my swap was going to take months to do, I had mine running and driving in about 2 weeks, The hardest part was the oil pan. You need a rear sump oil pan. I made my own and now I have been building them for the hybridz guys. check out this link. Also take a look at my posts on hybrid z. I posted pics and details about my swap.

I picked up a new sheetmetal brake and other toys for building these oil pans - HybridZ
pat1 is offline   Reply With Quote