[DALAZ_68]

if you dont have an impact gun and need to remove a flywheel (whether motor is in or out of the car)

withe trans removed and clutch press plate removed...take an upper trans bolt and re install into blockon the side..reinstall on of the press plate bolts to the FW...

jamb an extension bar or breaker bar (something long enough, strong enough, and thin enough) that can be jamb between the 2 bolts to keep the FW from freespinning...and break tension

PB blaster of WD-40 ur shit prior...

this method can work with either one person doing the work...but 2 is best...