Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post - PBM Cobra Downpipe and Forced Performance combo install problem

xiaphin · 08-22-2010, 04:19 PM

Tried installing my PBM downpipe today but a no go. Pipe is hitting bell housing and bottom of car. So I tried putting on the greddy... no good either... stock unit didnt fit either. All 3 were hitting the bellhousing. Thinking that the FP manifold doesnt put the turbo in stock location and needs to be spaced out about half inch or so. Took some measurements from block and firewall. Could somebody measure the location of stock turbo with stock manifold, that would be nice. Took some pics.

08-22-2010, 04:19 PM	#1
xiaphin Zilvia Junkie Join Date: Apr 2003 Location: Pleasanton Age: 41 Posts: 451 Trader Rating: (32)	PBM Cobra Downpipe and Forced Performance combo install problem Tried installing my PBM downpipe today but a no go. Pipe is hitting bell housing and bottom of car. So I tried putting on the greddy... no good either... stock unit didnt fit either. All 3 were hitting the bellhousing. Thinking that the FP manifold doesnt put the turbo in stock location and needs to be spaced out about half inch or so. Took some measurements from block and firewall. Could somebody measure the location of stock turbo with stock manifold, that would be nice. Took some pics. __________________ 2018 Audi RS 3 \| Unitronic Stage 1 ECU and Stage 2 TCU tune