Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post

Options13 · 08-31-2010, 09:12 PM

ok so i'm sooo close to finishing this swap. i just need a little guidance..

i got an 89 240sx with an s14 sr20det. and i went to start it today for the first time, it took a little bit of cranking.. probably about 5 seconds, i started it, and it ran good, idled good, no smoke, sounded good, and everything, it just wouldn't rev past 2800 rpms... and when i would go to shut it off, and try to start it again, it wouldn't start, at all.. so i take off the maf, and clean it with cleaner, and put it back on, it started up, still didn't rev past 2800. so i shut it off, and it didn't start again... its almost as if i have to wait a period of time before i can start it again...

what does this sound like to you guys? my friend was telling me my ignitor could be bad...

08-31-2010, 09:12 PM	#1
Options13 Nissanaholic! Join Date: May 2007 Location: OR Posts: 1,825 Trader Rating: (43)	s14 sr20det won't rev past 2800 rpms ok so i'm sooo close to finishing this swap. i just need a little guidance.. i got an 89 240sx with an s14 sr20det. and i went to start it today for the first time, it took a little bit of cranking.. probably about 5 seconds, i started it, and it ran good, idled good, no smoke, sounded good, and everything, it just wouldn't rev past 2800 rpms... and when i would go to shut it off, and try to start it again, it wouldn't start, at all.. so i take off the maf, and clean it with cleaner, and put it back on, it started up, still didn't rev past 2800. so i shut it off, and it didn't start again... its almost as if i have to wait a period of time before i can start it again... what does this sound like to you guys? my friend was telling me my ignitor could be bad...