Thread
:
Project Lilia Uber ("BUILD THREAD")
View Single Post
09-03-2010, 09:52 AM
#
21
xharobikeslifex
Zilvia Member
Join Date: Nov 2009
Location: Shawnee
Posts: 168
Trader Rating: (
5
)
Okay since I'm not so sure who exactly will be welding in my firewall im going to leave that aside for now until I figure something out. But for those of you who want to know what my engine bay currently looks like now here's some pics...
So in the mean time I've decided to thoroughly clean the sr20det engine/transmission heres the supplies I will be using:
Heres the project:
First remove the A/C compressor
Next take off the P/S pump
Then take off the motor mount bracket. since I have previously removed the the exhaust manifold and turbo, you will have to do the same.
move over to the intake side and take out the alternator and bracket
look underneath the intake manifold and remove the knock sensor
unbolt the bracket that supports the intake manifold to the block
And finally disconnect everything that is attached to the block that's connected to the intake manifold such as: lines, brackets, metal tubes, sensors, and coil pack plugs.
once the intake manifold is removed plug the intake holes with some towls, and continue removing things that you don't want to get painted such as lines and what not.
in the end your aiming to have your block completely stripped like so
Last edited by xharobikeslifex; 09-19-2013 at
09:40 PM
..
xharobikeslifex
View Public Profile
Find More Posts by xharobikeslifex