Quote:
Originally Posted by sidedrifts13
i have a t28 bottom mount and reclocked on a s13 with stock maf and i was wondering if you offer the inlet pipe for my set up but with the breather thanks...
also is the t25 and t28 inlet the same?
|
The T25 inlet has the valve cover breather and the t28 does not since the original t28 has its breather its located on the OEM metal inlet elbow.
Quote:
Originally Posted by s14fbs
yes I had to use a old 90 coupler I had
but it fits perfect my pipe can't even blow off it follows the frame rail
the setup is
jgs log manifold
t/3t/4 turbonetics turbo
even it was a diff manifold and sat in a diff location it would still fit cause u cut the piping to size so some
might cut
less off cause it sits further back or more off cause it sits further forward or if it sirs out more there's more room to go side to side plus you cAn clock the turbo more if needed
|
thanks for posting up the info!
__________________
How To order: You can order directly from our zilvia advertiser threads. When you add to cart, you get an instant shipping estimate, & the cart will remember all of your items as you move between forum threads and our website www.poweredbymax.net until you remove them or check out. I can also calculate estimates manually for you but the cart's estimates are way faster and more accurate.
Order Inquiry: IM me your real name and paypal address.
Thanks for your business!
|