|
Just run a wire (with a in-line fuse!!!!) from the batt.(+) to the switch. Then from the switch to the lights. Then ground wire to any thing touching the frame. Remember if there is any paint where you are grounding it to you won't get a good ground.
That's about it. All a switch does is break the line of power. If you hooked it right to the batt. then it would just stay on all the time.
Hope that helped.
Electronics are pretty easy.
12v wont kill you, but it will bite you good. So be careful.
Dave.
__________________
92'240sx fb
77'280z Motor all done, now the rest
87'Ram 250, 383 4 speed, 4x4(sold to my pop's)
97'Hardbody, 4x4(new toy)
|