Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post - before the SR goes in, a few things to do.

Drifting-pedobear · 10-14-2010, 05:03 PM

okay, I've been compromising a list of things that should be done before the SR is plopped into its respective location. please add or comment on the list I've gather this far. tips, info, etc is very appreciated.

Coolant Temp Sensor
Front Main Seal
Rear Main Seal
Water Pump
Intake Plenum To Collector Gasket
Nismo Thermostat
Manifold To Head Gasket
Manifold To Turbo Gasket
Valve Cover Gasket
Spark Plug Cover Gaskets
Intake Plenum To Head Gasket
z32 Fuel filter
All hoses under intake manifold
4 bolt and 5 bolt turbo gaskets
Heater hose
new injector o-rings
PCV Valve
Clutch (pilot/throw out bearing)
resurface fly wheel
Nismo Clutch fork pivot
All belts

i think thats a pretty good list for a well done maintenance job. LMK what else or if you have any comments. thanks

10-14-2010, 05:03 PM	#1
Drifting-pedobear Zilvia Addict Join Date: Jan 2009 Location: seattle, wa Age: 34 Posts: 937 Trader Rating: (11)	before the SR goes in, a few things to do. okay, I've been compromising a list of things that should be done before the SR is plopped into its respective location. please add or comment on the list I've gather this far. tips, info, etc is very appreciated. Coolant Temp Sensor Front Main Seal Rear Main Seal Water Pump Intake Plenum To Collector Gasket Nismo Thermostat Manifold To Head Gasket Manifold To Turbo Gasket Valve Cover Gasket Spark Plug Cover Gaskets Intake Plenum To Head Gasket z32 Fuel filter All hoses under intake manifold 4 bolt and 5 bolt turbo gaskets Heater hose new injector o-rings PCV Valve Clutch (pilot/throw out bearing) resurface fly wheel Nismo Clutch fork pivot All belts i think thats a pretty good list for a well done maintenance job. LMK what else or if you have any comments. thanks __________________ RIGHTWHEELDRIVE.com