Quote:
Originally Posted by jaredpignoseDE
well now it doesnt even really pull hard like it should until 5500 or 6000 all the way to 7 and it kicks hard like vtec but before that it doesnt do hardly anything so now im really confused. it revs up fine with no load and doesnt really sputter first getting into it...
|
Well thats what cams do. It moves the power band into the higher rev ranges. Thats why you pick the cams for the purpose. You dont want 290 degree cams when you just putting around town.
Most say the the 256in/264ext is perfect for the KA/SR that gonna see street and track duty. Keeps a usable power band without running out of breath in the top end.
But as far absoultley no low end power or torque that sounds fishy. From going back and reading all you problems i think that you need to degree your cams.
BC cams are notorius for not being drop in cams like the GReddy easy cams or HKS cams are. You need to it take somewhere and have them degreed. You could it yourself there is a good tutorial on youtube by 2 bros racing on how to degree cams but it's a little advandced for novice mechanics. I bet thats your problem, if its not a fuel issue.
You cams should of came with a little card that has all the degree setting on them. Use the values there to set the degree.