Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post

negrosx13 · 11-14-2010, 07:52 PM

I got j30 hubs ready to send out the shop to get a new retainer clip groove machined in. But i read somewhere that the new ring groove should be cut .198 from the old groove.Make sense tho but i want to be 1000% sure
I know the s13 bearings are 2mm taller than the j30's bearings..

I done all the research just i want to be 100% sure

*The pics are from the write-up*

Original retaining ring groove^^^^^^^^^^^^^^

New retaining ring location right above the old one^^^^

11-14-2010, 07:52 PM	#1
negrosx13 Zilvia Addict Join Date: Feb 2009 Location: Houston,tx Posts: 948 Trader Rating: (14)	j30 hubs question I got j30 hubs ready to send out the shop to get a new retainer clip groove machined in. But i read somewhere that the new ring groove should be cut .198 from the old groove.Make sense tho but i want to be 1000% sure I know the s13 bearings are 2mm taller than the j30's bearings.. I done all the research just i want to be 100% sure The pics are from the write-up Original retaining ring groove^^^^^^^^^^^^^^ New retaining ring location right above the old one^^^^ __________________ MORE BACON STRIPS