Quote:
Originally Posted by dorf26
I did a ka24de swap and i cant get any spark. iv tried two different coils and two different distributers but no change. also have had a few different harnesses. any and all opinions will be very helpful.
|
You know you have no spark cause you've set a plug on the valve-cover or shock strut top and hooked a wire too it and you're seeing no spark right? (You aren't just guessing its no spark and not fuel right?)
As people said check your grounds. There is one that connects to the firewall in the middle top back of the engine. Also is your coil connected to the chassis, that is ground for it.