Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post

xxoreolovexx · 12-23-2010, 06:17 AM

you shouldnt need a re-tune. I would only keep it at 9-10 psi mac though. You def need a wideband bro. These KA's are fun but one little thing goes wrong and boom. When i built my KA-T the first thing i bought was an innovate lc-1. Personally i would get some stock STI injectors (yellow top = sidefeed, pink top = top feed.) Then i would get a n62 maf (because IIRC the n60 can only safely read up to about 270hp) Then you get a new set of chips from enthalpy (great choice by the way) install it all and turn it to 12psi.

12-23-2010, 06:17 AM	#9
xxoreolovexx Zilvia Member Join Date: Mar 2010 Location: nj Age: 39 Posts: 184 Trader Rating: (2)	you shouldnt need a re-tune. I would only keep it at 9-10 psi mac though. You def need a wideband bro. These KA's are fun but one little thing goes wrong and boom. When i built my KA-T the first thing i bought was an innovate lc-1. Personally i would get some stock STI injectors (yellow top = sidefeed, pink top = top feed.) Then i would get a n62 maf (because IIRC the n60 can only safely read up to about 270hp) Then you get a new set of chips from enthalpy (great choice by the way) install it all and turn it to 12psi.