View Single Post
Old 12-24-2010, 12:25 PM   #5
zeromechanic
 
Join Date: Nov 2010
Location: Lakeland FL
Posts: 18
Trader Rating: (0)
zeromechanic is an unknown quantity at this point
Quote:
Originally Posted by angel mkiv View Post
ive been looking for ever already now and felt around every runner for a connected hose and nothing!!other then the 2 nuts and 3 bolts on the bottom half, 2 nuts and 6 bolts on top,and the bolt holding that vaccum hose connected to the intercooler what other nut/bolt is there?
I had problems with mine also, but the upper manifold will not come off unless you undo the lower manifold also, they come out at the same time, they are put in at an angle so just undo all the bolts for the lower and it should come off with a little wiggling.
zeromechanic is offline   Reply With Quote